2013 Case IH Quad trac 600 (2013) – Unmatched Power, Traction & Hydraulics
The **Case IH Quad trac 600**, 2013 model, is a full-crawler / track tractor designed for heavy draft, wide implements, aggressive tillage, and demanding agricultural tasks. With rated power of approximately **600 HP (≈ 447.4 kW)** via a 12.9-litre, six-cylinder FPT / Case IH engine, it delivers massive drawbar performance, excellent traction through its four-track (crawler) undercarriage, and robust hydraulic & hitch capabilities. Full-powershift 16 forward × 2 reverse transmission, independent 1000 rpm PTO, and massive hydraulic flow make this tractor a formidable machine in large-scale operations.
Key Specifications & Features.
2013 Case IH Quad trac 600 (2013)
- Rated / Boost Power: ~600 HP rated; can reach up to ~660 HP under load / boost conditions.
- Transmission: Full Powershift 16F × 2R (16 forward, 2 reverse) gears.
- Undercarriage / Track Setup: Four tracks (crawler tracks), often 30-36-inch track widths.
- Hydraulics: Closed-center, pressure/flow compensated (PFC) hydraulic system. Standard pump flow ~159 L/min; high-flow / Twin Flow optional up to ~428 L/min.
- Rear Hitch / Lift Capacity: ~8,900 kg (≈ 19,728 lbs) rear lift (Category 4N) at standard measurement points.
- PTO: Independent rear PTO, 1-¾-inch, 1000 RPM.
- Dimensions & Weight:
• Operating / unballasted weight ≈ 24,405 kg; ballasted up to ≈ 25,401 kg depending on configuration.
• Wheelbase ~391 cm (154 inches)
• Transport dimensions: length ~7.6 m; height ~3.95 m; width ~ ~3.0 m depending on track width. - Fuel & AdBlue / DEF (Exhaust Treatment): Large fuel capacity (~470 gallons / ~1,779 liters) plus DEF / AdBlue tank (~242 liters) to meet emissions requirements.
- Steering & Comfort: Articulated frame steering, premium cab with Surveyor or equivalent, heavy-duty electrical system (200 A alternator), dual batteries.
Why It’s a Premium Heavy-Duty Choice.
2013 Case IH Quad trac 600 (2013)
- Exceptional Traction & Reduced Soil Compaction: The crawler track configuration ensures excellent weight distribution and grip in soft or uneven soils.
- Massive PTO & Drawbar Capability: With ~520-535 HP claimed PTO, this unit can handle very large implements and tasks requiring continuous high horsepower.
- Hydraulic Flexibility: Option for high / twin-flow hydraulics supports implements needing large oil volume or multiple SCVs under load.
- Work Cycle Versatility: Suitable for both heavy field work (ploughs, subsoilers, large seeders) and haul / transport with road-compatible speed ratings.
- Production & Support Legacy: Case IH’s Quad trac line is well-established, and parts / service for these machines are widely available in many markets—if maintained.
Applications & Best Use Cases.
2013 Case IH Quad trac 600 (2013)
- Deep tillage and large cultivations where footprint and power matter.
- Large seed drills, air seeders or planters over wide widths.
- Heavy haul tasks, e.g. pulling large trailers, or operating in combination with high-capacity spreaders.
- Land preparation in wet or variable soils where tracks reduce slippage.
- Contractor or large-scale farm operations needing robust daily uptime and heavy-duty performance.
Pre-Purchase / Inspection Checklist.
2013 Case IH Quad trac 600 (2013)
- Verify engine & PTO hours; look for turbo & after-treatment health, smoke, leaks.
- Inspect tracks: condition of pads, rollers, tensioning system (especially hydraulic track tension pipes).
- Check transmission: full powershift behavior under load; ensure gears & reverse work smoothly.
- Hydraulic system: SCVs under load, high flow options, leaks, responsiveness.
- Rear hitch operation under load; verify lift arms & pins condition.
- Cab & electronics: comfort (seat, HVAC), visibility, Surveyor cab features, steering functions.
- Fuel / DEF system: lines, tanks, filtration, cleanliness.
- Structural & frame: hitch points, drawbar, axle housings.
Product Summary Table.
2013 Case IH Quad trac 600 (2013)
| Feature | Specification / Value |
|---|---|
| Model / Make | Case IH Quad trac 600 (2013) |
| Rated Engine Power | ≈ 600 HP (447.4 kW) |
| Boost / Max Power | ≈ 660 HP in high-load / boost conditions |
| Transmission | 16F × 2R Full Powershift |
| Track Type | 4 tracks (crawler / Quad trac) with track widths ~30-36 in |
| Standard Hydraulic Flow | ~159 L/min; with options up to ~428 L/min (Twin Flow / High Flow) depending spec |
| Rear Hitch Lift | ≈ 8,900 kg (Category 4N hitch) |
| PTO Speed / Type | Independent 1000 rpm rear PTO (1-¾ in shaft) |
| Operating / Ballasted Weight | ≈ 24,405 – 25,401 kg depending on ballast/options |
| Wheelbase | ≈ 391 cm |
| Transport Speed | ≈ 40 km/h standard spec |
Conclusion – Heavy-Duty Powerhouse for Big Tasks.
2013 Case IH Quad trac 600 (2013)
If you’re looking for raw power, outstanding grip, and durability for high workload environments, the **Case IH Quad trac 600 (2013)** delivers. When properly maintained—tracks & tensioners, power shift transmission, hydraulic systems, PTO, and cab amenities—this is a durable machine that holds value. Share your listing’s specific condition, hours, tyres / tracks, price, and location, and I can tailor this description into a fully localized ~1,100-word version with structured FAQ + schema so you get full SEO value. Order Here.
